Quick Answer
A SCR (Silicon Controlled Rectifier) is a semi-controlled power semiconductor device widely used in industrial DC UPS systems to convert AC power into regulated DC output.
Unlike high-frequency MOSFET or IGBT switching rectifiers, SCR rectifiers rely on industrial-frequency phase-shift triggering and natural commutation to control DC output voltage.
By adjusting the SCR firing angle (α), the system changes the conduction time of the SCR devices and regulates the average DC output voltage. With advantages including high reliability, strong surge resistance, low switching loss and stable battery charging performance, SCR rectifiers remain a widely used solution for high-power industrial DC UPS applications.
Key Takeaways: Understanding SCR Rectifiers in DC UPS Systems
• SCR rectifiers regulate DC output voltage through phase-shift triggering control.
• SCR devices can be triggered by gate pulses but cannot be turned off by gate control.
• Natural commutation through AC voltage zero crossing is the key operating mechanism of SCR rectifiers.
• Industrial DC UPS systems commonly use single-phase, 6-pulse and 12-pulse SCR bridge rectifiers.
• SCR rectifiers support constant-current charging, floating charging and grid voltage compensation.
• Filtering and protection circuits ensure stable DC output and reliable long-term operation.
Why Are SCR Rectifiers Used in Industrial DC UPS Systems?
Small consumer DC UPS systems usually use diode uncontrolled rectification combined with voltage regulation solutions. This structure is simple and cost-effective, but the output voltage is fixed and cannot meet the requirements of industrial applications.
Industrial and telecom DC UPS systems need to satisfy:
• Constant-current fast charging
• Constant-voltage floating charging
• Temperature compensation
• Adaptive voltage regulation under grid fluctuations
Therefore, controllable rectification technology is required.
SCR rectifiers are widely used in industrial DC UPS systems because they provide adjustable DC output voltage and reliable charging control.
The key advantages of SCR rectifiers include:
• High voltage and high current capability for harsh industrial power environments
• Strong surge resistance
• Stable operation with low interference
• Precise DC output voltage adjustment through phase-shift triggering
• Reliable battery charging performance
• Simple structure with high reliability for long-term unattended operation
How Does an SCR Rectifier Work?
An SCR (Silicon Controlled Rectifier), also called a thyristor, is a semi-controlled power semiconductor device with three terminals:
• Anode (A)
• Cathode (K)
• Gate (G)
The operating principle of SCR is different from fully controlled switching devices.
When forward voltage is applied between the anode and cathode, a trigger pulse applied to the gate turns the SCR on.
After conduction:
• The SCR continues conducting even after the gate pulse disappears.
• The gate signal no longer controls the conduction state.
Unlike MOSFET or IGBT devices, SCR cannot be turned off through gate control.
The SCR can only turn off when:
• The anode current decreases below the holding current.
• The anode voltage disappears or becomes reverse biased.
In industrial AC rectifier systems, SCRs rely on natural commutation caused by AC voltage zero crossing.
The basic SCR operating logic can be summarized as:
Forward voltage applied → Trigger pulse → SCR conducts → AC zero crossing → Natural turn-off
SCR Topology and Phase Control Principle
Industrial DC UPS systems mainly use single-phase or three-phase full-controlled SCR bridge rectifiers.
Typical configurations include:
• Single-phase SCR bridge rectifiers
• Three-phase 6-pulse SCR full bridge rectifiers
• 12-pulse SCR rectifiers for harmonic reduction
The complete DC UPS rectification process is:
AC Input → Filtering and EMI Protection → Isolation / Current Limiting Reactor → SCR Bridge → DC Filtering → Stabilized DC Bus → Load + Battery Charging Circuit
Compared with diode rectifiers, SCR rectifiers can actively control DC output voltage by changing the SCR triggering time in each AC cycle.
Phase-Shift Triggering and Voltage Regulation
The firing angle (α) represents the delay between the AC voltage zero-crossing point and the moment when the SCR receives a trigger pulse.
The relationship between firing angle and output voltage is:
- Smaller α → Longer conduction time → Higher DC output voltage
- Larger α → Shorter conduction time → Lower DC output voltage
When α is close to 0°:
- SCRs conduct earlier.
- The conduction period is longer.
- Output DC voltage approaches the maximum value.
When α increases:
- SCR triggering is delayed.
- Effective conduction time decreases.
- The average DC output voltage decreases.
The control system continuously samples:
- DC bus voltage
- Battery voltage
- Load current
and dynamically adjusts the firing angle to achieve stable voltage regulation.
Natural Commutation and SCR Operating Process
One of the most important characteristics of SCR rectifiers is that they do not require forced turn-off circuits.
The SCR switching process depends on natural commutation through AC zero crossing.
The operation process includes:
1. Positive Half Cycle
The corresponding SCR pair receives trigger pulses and conducts current, allowing energy transfer from AC input to the DC output.
2. AC Voltage Zero Crossing
When the AC waveform reaches zero crossing, the SCR current naturally decreases below the holding current.
The conducting SCR turns off automatically.
3. Negative Half Cycle
The opposite SCR pair receives trigger pulses and starts conduction.
4. Continuous Operation
The process repeats every AC cycle, producing continuous DC output.
Because SCR rectifiers operate at industrial frequency and use natural commutation, they achieve:
- Very low switching loss
- Low heat generation
- High reliability
- Long-term stable operation
SCR Battery Charging, Filtering and Protection Control in DC UPS
DC UPS systems require not only AC-to-DC conversion but also accurate battery charging control.
SCR phase control allows the system to adapt to different battery charging conditions.
Constant Current Charging
When the battery is deeply discharged:
- The control system samples charging current.
- The SCR firing angle is adjusted.
- Charging current is controlled to avoid excessive current impact on the battery.
This enables stable fast charging and protects battery performance.
Constant Voltage Floating Charging
When battery voltage approaches the full-charge level:
- The control system changes to voltage-based regulation.
- The SCR firing angle is adjusted continuously.
- Stable floating voltage is maintained.
This prevents overcharging while keeping the battery fully charged.
Grid Voltage Compensation
When AC input voltage changes:
- High AC voltage → Increase firing angle and reduce conduction time.
- Low AC voltage → Decrease firing angle and increase conduction time.
Through closed-loop control, the DC bus voltage remains stable despite grid fluctuations.
Freewheeling and Harmonic Control
Because DC UPS systems usually connect batteries and DC loads, the load has strong energy storage characteristics.
During SCR non-conduction intervals:
- Current continues flowing through the freewheeling diode.
- Output voltage interruption is avoided.
- DC output waveform remains smooth.
SCR phase-controlled rectification generates harmonics, therefore industrial systems commonly use:
- 6-pulse rectifiers
- 12-pulse rectifiers
- Input reactors
- Output filtering inductors and capacitors
to reduce harmonic impact and improve DC bus quality.
SCR Protection Functions
SCR rectifier systems include multiple protection mechanisms:
| Protection Function | Control Logic |
| Over-current protection | Increase firing angle or stop triggering |
| Over-voltage protection | Delay triggering and reduce output voltage |
| Phase loss protection | Detect missing phase and limit output |
| Soft start protection | Gradually reduce firing angle to avoid startup surge |
SCR Rectifier vs High Frequency Switching Rectifier
| Item | SCR Rectifier | High Frequency Switching Rectifier |
| Device Type | Semi-controlled device | Fully controlled device |
| Operating Mode | Industrial frequency commutation | High-frequency switching |
| Control Method | Phase-shift triggering control | High-frequency switching control |
| Switching Loss | Very low | Higher due to high-frequency operation |
| Interference Resistance | Strong | Relatively weaker |
| Ripple Characteristics | Industrial frequency ripple controllable | High-frequency ripple characteristics |
| Size | Larger | More compact |
| Dynamic Response | Moderate | Faster |
| Application | Large-power industrial DC UPS systems | Medium/small power precision equipment |
SCR rectifiers are mainly suitable for large-power industrial DC UPS applications where reliability, stability and long service life are critical.
High-frequency switching rectifiers are more suitable for applications requiring smaller size and faster dynamic response.
FAQ About DC UPS SCR Rectifiers
What is an SCR rectifier in a DC UPS system?
An SCR rectifier is an AC-to-DC conversion system that uses thyristors to regulate DC output voltage through phase-shift triggering control.
Why cannot an SCR be turned off by the gate?
The gate only controls SCR triggering. The SCR turns off naturally when current decreases below the holding current during AC zero crossing.
How does SCR regulate DC voltage?
SCR regulates DC voltage by adjusting the firing angle, which changes the conduction time and average output voltage.
Why are 6-pulse and 12-pulse SCR rectifiers used?
They are used to reduce harmonics and improve DC output quality in high-power industrial applications.
How does SCR support battery charging?
The control system adjusts the SCR firing angle according to voltage and current feedback to achieve constant-current charging, floating charging and grid voltage compensation.
Conclusion
The core principle of DC UPS SCR rectification can be summarized as:
Phase-shift triggering + natural commutation + closed-loop regulation
By controlling SCR conduction time, industrial DC UPS systems achieve stable DC voltage output, reliable battery charging and adaptive operation under grid fluctuations.
With its advantages of low switching loss, strong reliability, stable charging performance and excellent environmental adaptability, SCR rectification remains an important solution for industrial, telecom and critical DC power applications.
About EverExceed
A Global Leading Manufacturer of Customized AC/DC Power Solutions
20+ Years of Battery Manufacturing Experience
10+ years System Integration Experience